SKU: 93830167215

034Motorsport 1-Piece, Pinned & Unpinned Crank Hub w/ Crank Bolt Capture Plate - BMW N55 & S55

$530.71 $589.68
Save 10%
No.2 Bestseller on reelrocktour.hu >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 15 - Jul 20

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

034Motorsport 1-Piece, Pinned & Unpinned Crank Hub w/ Crank Bolt Capture Plate - BMW N55 & S55The BMW N55 and S55 platforms deliver incredible performance, but their factory multi piece crank hubs are a known weak point capable of catastrophic timing drift or total failure. The 034Motorsport 1 Piece Pinned Unpinned Crank Hub with Crank Bolt Capture Plate is engineered as a complete, motorsport grade solution that eliminates slip, locks in long term reliability, and protects your engine under the highest levels of power and abuse. Unmatched

The BMW N55 and S55 platforms deliver incredible performance, but their factory multi-piece crank hubs are a known weak point capable of catastrophic timing drift or total failure. The 034Motorsport 1-Piece Pinned/Unpinned Crank Hub with Crank Bolt Capture Plate is engineered as a complete, motorsport-grade solution that eliminates slip, locks in long-term reliability, and protects your engine under the highest levels of power and abuse.

Unmatched Engineering. Zero Compromise:

A Permanent Fix for the Factory Crank Hub Problem

The factory crank hub used in BMW’s N55 and S55 engines is a well-known weak point, particularly as power levels increase. The OEM design uses three individual sprocketed pieces that drive the timing chains off the crankshaft. Importantly, none of these sprockets are mechanically linked together nor to the crankshaft . They rely only on friction washers and the clamping force of the crank bolt to stay aligned.

Under higher horsepower, rapid throttle transitions, hard launches, or even completely stock operation, the friction surfaces can slip. When this happens, the timing components rotate out of alignment, causing the engine to fall out of mechanical timing. This can quickly lead to bent valves, piston-to-valve contact, or catastrophic engine failure.

A True Mechanical Solution Instead of More Friction:

The 034Motorsport 1-Piece Pinned Crank Hub replaces the entire multi-piece factory stack with a single CNC-machined billet EN36 steel unit. By combining all timing sprockets into one rigid body, every driven timing component remains physically linked, eliminating the possibility of internal hub slip.

You can configure the hub in the way that best suits your build:

Unpinned Installation

The 034 design can be installed in an unpinned configuration using the factory crankshaft with no drilling required. This setup works seamlessly with the included Crank Bolt Capture Plate, which locks the crank bolt in position and prevents any chance of bolt movement.

Pinned Installation (Recommended for Heavy Abuse/High Power)

For those who want maximum mechanical security, the hub can also be installed in a 4-pin configuration, physically interlocking it with the crankshaft. One of the key advantages of the 034Motorsport Crank Hub is that it eliminates the need for a separate hub version. You can choose pinned or unpinned using the same part.

To ensure safe and accurate drilling, the kit includes a carbide drill bit and a dedicated drill guide and alignment jig. Most competing kits only provide a high-strength steel drill bit, which wears quickly when cutting into the crankshaft.

Crank Bolt Capture Plate: The Second Layer of Defense

Machined from 6061-T6 billet aluminum and anodized for long-lasting protection, the Capture Plate surrounds and locks the OE crank bolt in place, preventing any possibility of bolt walk-out. Paired with the 1-Piece Hub, this configuration eliminates both crank bolt and crank hub slip, protecting against the most common N55/S55 timing failures.

Elongated mounting slots allow the Capture Plate to be used with both OE and 034Motorsport crank hubs, ensuring a precise and secure installation.

Built to Protect Your Engine, No Matter the Power Level:

From aggressively tuned street builds to fully track-prepped cars, the 034Motorsport 1-Piece Pinned Crank Hub and Capture Plate system is engineered to be the definitive solution for securing the crank hub. With uncompromising materials, precision engineering, and a complete installation package, this upgrade delivers the reliability and confidence your BMW deserves.

Upgrade once. Protect forever.

1-Piece Crank Hub Features:

  • 1-Piece CNC-Machined Hub, Installable In 4-Pin Or Unpinned Configuration
  • Prevents Crank Hub Slip And Failure On High-Power Engines
  • Billet EN36 Steel, Heat-Treated With 0.75 Mm Case Hardening
  • High-Strength Design Built For Extreme Power And Abuse
  • Optional Precision Dowels Mechanically Lock Hub To Crank (Crank Drilling Required)
  • Complete Installation Kit: Jig, Guide, Locating Bolt, And Carbide Drill Bit
  • Includes New OE Crank Bolt

Crank Bolt Capture Plate Features:

  • Machined From 6061-T6 Billet Aluminum
  • Anodized For Durability And Long-Lasting Finish
  • Surrounds And Locks OE Crank Bolt, Preventing Loosening
  • Fits 034Motorsport Or OE Crank Hub With Elongated Slots For Secure Install
  • Prevents 3-Piece Crank Hub Slip On S55 And N55 Engines
  • Installs With Engine In-Situ By Dropping Radiator For Access

 

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 93830167215

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.1 ★★★★★
Based on 2273 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
F
3fingers
Port Orchard, US
★★★★★ 3
OK. Drag to setup. Needs more stable feet
Color: Black, Size: 4 Panel-88''
I was glad to find these. The benefits of having them in a recording setup is helping suppressing noise for a vocal booth. It's a layer that surrounds the recording box. Nice! (But away from audio hardware or DAW). Here is the not so nice part: The feet! It's able to stand (as it needs to do this). But it cannot be bumped. If it does, it's coming down onto something. I believe the feet units are not wide enough (or long enough). That makes for an easier tumble risk. So far, they haven't, but it's like being in the woods over leaves - it feels dangerous with every step! (That's actually true). They are tall enough, wide enough, material OK. But the feet for the main assembly do not seem sturdy enough. There are ways to help that. I'm thinking a 2x4 to augment the base. Make them wider. It can be done. It was a drag to set these up, and I'm sure to modify them like i'd want them. But, they do come in at a much lower price that other similar dividers. Consider all this because I've seen more solid dividers ( with padding) that would basically be the 1/2 cost of these. But i'd think they'd be easier to assemble, stand sturdier, and without that feeling of an impending fall (or fail). This is my opinion. I hope it helps.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
A
Verified Purchase
Amazon Customer
Phoenix, US
★★★★★ 1
wrong size of metal components. incorrect items. non functioning
Color: Black, Size: 4 Panel-88''
The owner of this product sent me the incorrect pieces when I tried to install. It didn’t fit. The pieces were missing holes and once I connected the wrong pieces after knowing now they’re stuck and I can’t return them even though Amazon was kind enough to refund me. I just want to warn people this product is such a disappointment because it looks good. It’s good price, but you can’t even assemble the thing very disappointed.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 31, 2026
F
foundbyXtopher
Battle Creek, US
★★★★★ 4
Sturdy Folding Room Divider with Good Privacy Coverage and Modern Look
Color: Black, Size: 4 Panel-88''
I picked this room divider up to help separate space in a room without needing permanent walls, and overall it works very well for creating privacy while still looking clean and modern. The size is one of the biggest advantages. At 6 feet tall and roughly 88 inches wide, it creates a noticeable visual separation and works well for apartments, dorms, offices, studios, shared rooms, or content creation setups where you want to hide clutter or define different areas. The black fabric and frame design give it a simple modern appearance that blends easily into most spaces without looking overly decorative or outdated. It has a clean minimalist look that works especially well in offices, bedrooms, gaming rooms, or studio environments. Assembly was fairly straightforward overall. Once fully put together, the divider feels reasonably stable for normal indoor use. The folding panel design also makes it flexible enough to angle different ways depending on the room layout. The portability is another strong point. Since it folds down, it is much easier to move or reposition compared to permanent partitions or heavier wooden dividers. That makes it practical for temporary privacy setups or changing room layouts frequently. Privacy performance is solid visually. It blocks sightlines well enough for changing areas, workspaces, video backgrounds, or separating sections of a room. The fabric also softens the space slightly instead of feeling harsh or industrial. One thing worth noting is that while it provides visual privacy, it is not soundproof. It helps define space and reduce some openness, but conversations and noise will still pass through normally. The material quality feels decent for the price range. The frame is lightweight but functional, though I would still avoid rough handling or constant aggressive repositioning over time. Value for money is good considering the size, flexibility, and convenience. Similar room dividers can become expensive quickly, especially for taller multi-panel setups. Overall, this is best for anyone needing an affordable flexible way to create separation and privacy in shared or open spaces. It works especially well for apartments, dorms, offices, studios, remote work setups, or content creators wanting a cleaner background without permanent construction.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 8, 2026
R
RealDeal
Los Angeles, US
★★★★★ 5
Looks nice but it's not very stylish, works as intended, happy with purchase
Color: Black, Size: 4 Panel-88''
This 6 ft room divider is exactly what I needed and works great! It was very easy to set up and took only a few minutes to assemble. I was pleasantly surprised by how lightweight it is, and it folds up easily for storage when not in use. The fabric-style panels look nice and provide good privacy, and the included clips help keep everything neatly in place. It’s a simple but effective design that does what it’s supposed to do. Because it’s lightweight, it may need a bit of extra support depending on where you place it—I used small weights on the base, and that completely solved the stability issue. Overall, I’m very happy with this purchase. It’s practical, easy to use, and a great value for the price. I would definitely recommend it! Industrial
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 22, 2026
L
LSch01
Port Orchard, US
★★★★★ 3
Assembly is harder than it should be; you get what you paid for
Color: Black, Size: 4 Panel-88''
Review of SUNALLY Room Divider 6FT Folding Privacy Screens, 4 Panel Fabric Divider for Room Separation, 88" W Freestanding Portable Wall Dividers Screen for Home Dorm Studio Office, Black I hate when I have to leave products a not so good review... Assembly is harder than it should be, mainly because there shouldn't BE any assembly. I have ordered several room divider privacy screens over the last couple of years and not one of them needed any kind of assembly. With that aside, it STILL was a pain in the sphincter to assemble. One of the "legs" just sits on top of a foot plate - it's not screwed in to anything. It's kind of flimsy and the base plates don't have anything on them to not scuff up the floor. With all that said, though, it does stand up and will block out what I need to block out. At the less-than-$50 price-point, it's kind of what should be expected. If I had purchased this outright, I would have considered sending it back and getting a higher quality. But if you only have $50 to spare and don't mind assembling things, it could be good for you.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 28, 2026

recommand products

Moncler Leather Sandals with Golden Effect Detail
214.50
BD Wings Logo CLOSE-UP Full Color Black Silver Seatbelt Belt - Punk Princess Fuchsia/Black Webbing
29.95
Hanover Coffee Table WHITE MARBLE ON SALE
475.00
Steel Frame Occasional Chair
1825.00
Altea Crew Neck NORVEGESE Cashmere Blend Sweater
228.52