General Pump PMRTSF2021 TSF2021 Fully Plumbed Made Ready 3600 PSI 8.5 GPM (Solid Shaft) Triplex Pressure Washer Pump

General Pump PMRTSF2021 TSF2021 Fully Plumbed Made Ready 3600 PSI 8.5 GPM (Solid Shaft) Triplex Pressure Washer PumpGeneral Pump PMRTSF2021 Fully Plumbed Made Ready 3600 PSI 8. 5 GPM (Solid Shaft) Triplex Pressure Washer Pump Product Information: Direct Drive Fully Plumbed Replacement Pump Fully Plumbed and ready to go 4 bolts off 4 bolts on Comes with unloader, pressure relief valve, pressure washer hose plug, and garden hose inlet w filter 24 MM Solid Shaft Provides a smooth liquid flow at 1750 RPM 15 oz. crankcase with one piece plunger design eliminates water

General Pump PMRTSF2021 Fully Plumbed Made Ready 3600 PSI 8.5 GPM (Solid Shaft) Triplex Pressure Washer Pump

Product Information:

• Direct Drive Fully Plumbed Replacement Pump
  • Fully Plumbed and ready to go - 4 bolts off - 4 bolts on
  • Comes with unloader, pressure relief valve, pressure washer hose plug, and garden hose inlet w/ filter
  
  
• 24 MM Solid Shaft
  • Provides a smooth liquid flow at 1750 RPM
  • 15 oz. crankcase with one-piece plunger design eliminates water entering crankcase
  
  
• Offers Maximum 3600 PSI & 8.5 GPM
  • Heavy-duty advanced forged brass manifold
  • Solid ceramic plungers with dust protection chamber
  • Rated for a maximum 125 PSI and 165-degree temperature
  
  
• Pulsar EZ Unloader
  • Adjust the pressure to suit the task at hand
  • Eliminates back pressure when pulling a manual start engine
  
  
• External Bypass Hose
  • Carries water to the inlet when the unloader valve opens
  • Adds safety if water circulates in pump for too long and quickly heats to dangerous temperatures
  
  
• Be Sure To Measure Flange Bolt Holes & Shaft Accurately!
  • There is a 25% restock fee on returned pumps
  • See the Owner's Manual (under the Specs tab) for dimensions
  • Pumps should not be allowed to operate in bypass mode for more than 1 minute
  
  
• Please Call Us For Sizing Assistance w/ Information Below:
  • Pumps should not be allowed to operate in bypass mode for more than 1 minute
  • 1. Age of Pump and Model # (must be no more than 15-yrs old)
  • 2. Is the pump Vertical or Horizontal
  • 3. Shaft Size - 3/4", 7/8" (vertical ONLY), 1", or Belt Drive XXmm
  • 3. Shaft Size - 3/4", 7/8" (vertical ONLY), 1", or Belt Drive XXmm
  • 4. Engine Brand and HP (model # if available would be helpful)