APEX Spacer Kit | 3mm | 5x120mm | 72.56mmAPEX Race Parts designs and manufactures high performance, flow formed and forged wheels for a growing list of vehicle makes. They are constantly expanding their product line with new wheel designs, wheel accessories and other performance and race parts. It is their mission to produce and distribute high quality performance parts that meet the demands of racing and street performance enthusiasts. PRODUCT INFORMATION Bolt Pattern 5x120mm Centre Bore
APEX Race Parts designs and manufactures high performance, flow-formed and forged wheels for a growing list of vehicle makes. They are constantly expanding their product line with new wheel designs, wheel accessories and other performance and race parts. It is their mission to produce and distribute high-quality performance parts that meet the demands of racing and street performance enthusiasts.
PRODUCT INFORMATION
Bolt Pattern5x120mm Centre Bore72.56mm Thickness3mm HubcentricYes ColoursBlack/Silver FinishAnodized ConstructionCNC Machined Materials6061-T6 Aluminium IdentificationLaser Engraved Kit QuantityTwo Spacers for One Axle
Please consider what extended bolts you will need for the spacers chosen, these can be found on our website
ADD SOME BREATHING ROOM
Make space for your mods. You can’t have your wheels and tyres rubbing on your suspension. Use wheels spacers to add enough clearance. There’s only one direction to go and that’s out.
CLEAR YOUR BRAKES
Not every wheel was destined to fit over your brakes. Give them a hand with wheel spacers to add the clearance necessary for those spokes to spin freely.
FILL YOUR FENDERS
Adequate clearance is a good thing, but excessive gap just doesn’t look right. Get your wheels flush with your fenders using APEX wheel spacers. Available in a wide variety of sizes to allow you to precisely dial in your fitment.
AVAILABLE IN A WIDE VARIETY OF SIZES
One size does not fit all. You’ll need a range of sizes at your disposal if you’re going to perfect your unique fitment. From thin to thick, APEX has your size needs covered.
HARDWARE REQUIRED... BUT OPTIONAL
Extended wheel hardware is required for spacers, but if you already own studs or lugs, you shouldn’t be required to purchase hardware with spacers. APEX wheel spacers can be purchased separately from extended hardware so the choice is up to you. Buy them on their own or pair them up with a stud kit or extended lugs & locks.
STUCK SPACERS SUCK
Say that 10 times fast. Save yourself from the headache. If you’ve owned spacers before, you’ve likely had one seized onto the hub. Instead of using a mallet to free it, utilize a tool meant for removal— a pry bar or screwdriver. APEX have added machined pry points around the spacer’s edge, making even the most seized spacers a breeze to remove.
STAND OUT BY BLENDING IN
You’ve worked hard on the colour scheme and coordination of your car and modifications. Spacers should not be any exception. They are meant to push wheels out, not stand out on their own. Available in two finishes— Black and Silver. Pick the one that compliments your ride.
STOUT CONSTRUCTION. UNWAVERING DEPENDABILITY.
For APEX, safety is paramount and to create a reliable, trustworthy spacer and relationship with the customer. APEX are passionate about racing, and would accept nothing less for themselves. Without question APEX had to utilize the best materials and employ military-grade construction methods. They ended up with a CNC machined, 6061-T6 Aluminium spacer with carefully chamfered edges, eliminated stress-risers, and appropriately lightweight design without sacrificing rigidity or surface area.
INSTANTLY IDENTIFIABLE
Remember trying to solve mystery of identifying spacers either on the car or as they sit loose inside of our tool boxes or parts pins? APEX do too. What started as scrawling numbers with a screwdriver evolved into clean, legible, laser-engraved size and measurement information on the spacer face and edges.
AS IF BMW CREATED THEM
Manufactured to perfectly match the measurements and tolerances of your BMW, these spacers are a natural extension of your wheel hub. Sloppy construction, uneven surfaces, and out-of-round shape will result in poor fit and cause vibrations.
NO, YOUR CAR ISN'T SUPPOSED TO SHAKE
At the end of the day, spacers are useless if they vibrate. APEX so confident in their spacers that if they cause any sort of vibrations or shakes, they’ll replace them. Simple as that.
WARNING
Wheel spacers are not intended to be stacked and doing so may result in damage or injury. Proper length extended hardware MUST be used in conjunction with wheel spacers. Wheel spacers are designed for off road use only are may not be legal in your state/territory.
Models
1 Series / E82 / E88 (2007-2013) / 1 Series M (1M)
Very tall and easy to set up, the only thing I will say is that they do have large gaps in between, so you won't have 100% privacy unless you add a curtain in the back. Other than that, they are easy to fold, sturdy, and esy to assemble. The gaps are an easy fix so I would say they are worth it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2026
T
Verified Purchase
Tyi Campbell
Belleville, US
★★★★★ 5
Great product and worth the money.
Size: 4 Panel-88'', Color: Black
Portable and stable. Perfect size and gives me the privacy I need when working from home. Stability is great as long as you place the stands correctly it won't wobble. I love it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 8, 2026
M
Verified Purchase
Mona T.
Bozeman, US
★★★★★ 5
Attractive
Size: 4 Panel-88'', Color: Grey
The assembled product is just as described. The screens look great! I am using them to hide the cluttered shelving in my garage. The area now looks quite neat Something I must say, though, is that the assembly was extremely difficult. I had to use a silicone spray and some pounding to get the A and B poles to fit together. Also, it required a great deal of strength to stretch and hold the fabric panels so that the bars inserted in each hem lines up with the screws inserted in A/B poles. I strongly recommend having a partner to help with the assembly.
while sc and screw into poles them once inserted intetchedtne end of each pole ( and B poles barely fit together. I used silicone spray on the end and then pounded them
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 12, 2025
It’s beige and not white. Once install - hard to disinstall. Need a drill to put it together
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 4, 2026
R
Verified Purchase
ralversity
Lake Worth, US
★★★★★ 3
Does the job, but assembling by yourself is a nightmare
Size: 4 Panel-88'', Color: Black
Does it do the job? Yes, although as others said there are small gaps but it's not a huge deal. The price is also good. But the reason I'm giving it a 3/5 is simply because the assembly for this was a complete nightmare. I honestly don't think I would recommend this to anyone unless they have another person to help them assemble it, because doing it by myself was terrible. I don't think I'd buy this again, I think I'd opt to just spend a bit more money and save myself the trouble personally.
Promo Codes Available: