LOAMLIN WS2812B Individually Addressable RGB LED Strip 16.4FT 5050SMD Smart Flexible Dream Full Color 60Pixels/m White PCB Light IP30 Non Waterproof

LOAMLIN WS2812B Individually Addressable RGB LED Strip 16.4FT 5050SMD Smart Flexible Dream Full Color 60Pixels/m White PCB Light IP30 Non WaterproofFeatures Individually Addressable LEDs Dream full color chasing color Programmable LED Strip with WS2812B IC Built in 5050SMD. Offering static effects, chasing effects, special effects, and more. 256 Brightness Display and 24 Bit Color Display. Each pixel can have its own color and brightness as your preference. Compatible Controllers The addressable WS2812B IC chip is built in the 5050 RGB SMD, Each LED can have its own color and brightness according

Features

• 【Individually Addressable LEDs】 Dream full color chasing color Programmable LED Strip with WS2812B IC Built-in 5050SMD. Offering static effects, chasing effects, special effects, and more. 256 Brightness Display and 24-Bit Color Display. Each pixel can have its own color and brightness as your preference.
• 【Compatible Controllers】 The addressable WS2812B IC chip is built-in the 5050 RGB SMD, Each LED can have its own color and brightness according to your wishes.. Compatible with A1-SLWF-03 WLED, K-1000C, Rasp Pi, UNO R3, ESP8266, ESP32.etc Programmable Controllers. Support SP611E, SP621E, and SP602E.etc music controllers. Support SP530E, DR03W, and SP511E.etc smart music controllers. Controllers need to be purchased separately.
• 【Easy to DIY】 Each LED on the LED strip can be cut out, and the remaining strip will still function. You can freely shorten, extend, or bend it according to your project needs. It comes with 3-pin JST-SM connectors and separate power/ground wires on both ends for easy installation. Separated Power/Ground Wires on Both Ends For Voltage Adding.
• 【Only Supports DC5V Power Supply】 Never use 12V or 24V power supply. Match with a controller to produce hundreds of lighting effects such as color curtains, waterfalls, raindrops, and strobe lights, you can also edit animation effect by Coreldraw/Flash/LedEdit software. Power supply needs to be purchased separately.
• 【Power】Light up 1 color (Red, Green or Blue) is 0.1W/LED; 2 color (Red+Green , Red+Blue or Green+Blue) is 0.2W/LED; 3 color (Red+Green+Blue =mixed White) is 0.3W/LED. When Light up more LEDs on full white color mode , the brightness at the end will become lower and yellower. This is a physical phenomenon of voltage drop, not a defect in the light strip. You can add DC5V voltage on the strip end to solved.It is not recommended to keep the white light at maximum brightness for extended periods.
• 【AS YOU LIKE】Led Strip Can be Use For Making Led Screen,Led Wall,advertising board, apply to Park, Square, Hotel, Airport, Office Building, Shopping Mall, Coffee Bar, KTV, Supermarket, Parlour, Bedroom, TV light, Karaoke Television Light, Computer Light, DIY and Home Decoration Etc.
• 【Please Note】 The LED strip is made by multiple 50cm PCB, so there is a soldering point every 50cm on the strip. But this Minor flaws will has no any bad affect of the strip performance. The IP30 and IP65 versions come with double-sided adhesive tape. The IP67 LED strip does not have tape on the back. Package does not include the controller and power supply for drive the LED strip.

Product Description

Specification IC Type :WS2812B Color Source: G R B(Not RGB) The Gray Level: 256 View Angle: 120° Input Voltage: DC5V Color:24-Bit Full Color PCB Board Color: Black/White PCB PCB Width:10mm Of IC: 1 IC Drives 1 Led Chip Protection Rate: IP30/ IP65 /IP67 Cuttable: Every LED is Cuttable Operating Temperature: -20 ~ +50°C Led Qty: 300Leds/16.4FT/5M Length x Widthx Height:5000mmx10mmx2mm Wave length(nm):Red(620-630) ; Green(515-530) ; Blue(465-475) Waterproof level: IP30/IP65/IP67 IP30 Non-Waterproof IP65 Waterproof in Silicon Coating IP67 Waterproof in Silicone Tube 3M Adhesive: IP30/IP65 . IP67 Without 3M Adhesive Power:0.1-0.3W/LED Power Supply Suggest:DC5V 20A