Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 13 - Jul 18
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Harley Davidson 4" Extended Stretched Saddlebags Dual 6 x 9 Speaker Lids & Replacement Fender 89 - 084" Extended Stretched Saddlebags Dual 6 x 9 lids, And Replacement Rear Fender for the Harley Davidson Touring, Road King, Street Glide, Ultra Glide Electra Glide Fiberglass 4" Extended Stretched Saddlebags Dual 6 x 9 lids, And Replacement Rear Fender for the Harley Davidson Touring, Road King, Street Glide, Ultra Glide Electra Glide Fiberglass Fits Touring bikes 89 08 This is a 100% fiberglass unit made here in the USA. This is not a cheap Chinese
4" Extended Stretched Saddlebags Dual 6 x 9 lids, And Replacement Rear Fender for the Harley Davidson Touring, Road King, Street Glide, Ultra Glide Electra Glide- Fiberglass 4" Extended Stretched Saddlebags Dual 6 x 9 lids, And Replacement Rear Fender for the Harley Davidson Touring, Road King, Street Glide, Ultra Glide Electra Glide- Fiberglass Fits Touring bikes 89 - 08 This is a 100% fiberglass unit made here in the USA. This is not a cheap Chinese imitation unit, these are the thick, heavy duty units made by us and that will survive through the worst of the weathers ( now i would not recommend putting it through a tornado or hurricane) and thousands of miles later on your Harley. Get the good stuff here, made by American Harley riders, we love our Harley's and we know you do too, we know the best and only want the best, so should you. This is a brand new, non painted in gel coat, never mounted extended/stretched rear fender, saddlebags. You will need to sand, prep, minor filler, mockup, primer & paint before installing as these are unfinished. All items pictured are included in this listing. These do not include hardware. Stock Harley hardware will fit. Don't buy those cheap abs/plastic units that crack with vibration and break with the smallest mishap, you won't be able to fix them if you lay your bike down. These units are made out of hand laid fiberglass, they are thick and durable and forgiving in case of an accident or incident. The listings is for 1 set only and does not include the bike! Get your Harley looking like a million bux with this saddlebag/fender kit! . All Items are made in high quality hand laid fiberglass, these are not mass produced cheap and flimsy units, they are thick and better quality than factory. Fits: Touring Bikes FLH/FLT Series Electra-Glide Road King Ultra-Classic Street Glide and others FL: 4-Speed Dresser FLH: 4-Speed Electra Glide FLHX: Street Glide FLHRS: Road King Custom FLHPI: Road King police model FLHR: Road King FLHRCI: Road King Classic FLHS: Electra Glide Sport FLHT: Electra Glide Standard FLHTC: Electra Glide Classic FLHTK: Limited FLHTCSE: Screamin Eagle Electra Glide FLHTPI: Electra glide police model FLHTCUI: Ultra Classic Electra Glide FLHTCUSE: Screamin Eagle Ultra Classic FLHXXX: Street Glide Trike FLT: Rubber Mount Dresser FLTC: Rubber Mount Dresser Classic FLTCU: Rubber Mount Dresser Classic Ultra FLHTCUTG: Tri Glide FLTR: Road Glide FLTRI: Road Glide EFI FLTRX: Road Glide Custom FLTRSEI: Screamin Eagle Road GlideShipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.8 ★★★★★
Based on 1550 reviews
Sort
Product Reviews
★★★★★ 5
BUY THIS ONE!
Model: NewSLS50_52
This is one of the good ones. There are other brands just as good, and manny brands are worse, but this handles well, rolls down easily, doesn't come off at all easily, and adapts to dips and curves like a champ.
Appropriately heavy and dead, I'm happy with the way it smothers panel resonances and even at muffling direct sound, like a big hand over my Uncle Harry's eternally noisy mouth. You can rip the foil but you have to work hard at doing that.
Remember to buy a brayer; you can roll overlaps nice and thin. Also remember to pre-wipe the sheet metal with a decent solvent like acetone or Stoddard/Varsol. It should last forever.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 26, 2025
★★★★★ 5
Good stuff, but watch the temp
Model: NewSLS50_52
I used this in my single cab pickup truck (89 ford.) It only took half the box (10 sheets or 25 square feet) to do the floors, but I bought the big box because I plan to do the doors, back wall, and maybe the roof as well. One thing I learned is that the temperature matters when you’re doing the installation. It was around 55F when I started in the evening, and when it dipped down into the 40s the sheets would not stick to the metal, and were hard to compress with the roller. That’s why I ended up only doing the floors and not any vertical surfaces; i will have to wait for a nice hot day. The other thing is that the foil layer on top is razor sharp at the edges, definitely wear gloves! I didn’t notice until after but I have little papercuts all over my fingers. Aside from those things, the install was easy and straightforward. The sheets cut easily with scissors, and any goo that ends up on your hands or scissors can be cleaned up with acetone (nail polish remover), or lacquer thinner. I would use this stuff again.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 16, 2023
★★★★★ 5
Very efficient!
Model: NewSLS50_52
Amazing the difference it makes on dumping the noise. Very easy to install. Pell and stick literally! Great!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 23, 2025
★★★★★ 5
Awesome filter! Nasty campground water no longer...
Style: Standard Filter
I have run these for years in my RV and they work killer! Here's some more in-depth thoughts:
Pros:
- These work better than I had expected. Just hook them up to the water source, hook your hose to it, run it to your trailer and viola` clean and good tasting water. Some of the places we have visited have had water that I wouldn't feed to my worst enemy. With this thing attached, it's very good tasting.
- I like the hose attachment that comes with this to aide in adding flexibility to the system and not put too much strain on the system. I have bought so many of these, I now use one attaching the filter to the nozzle, one out of the filter to my hose, and one attaching my hose to the trailer.
Notes:
- I will note that the manufacturer suggesting using these for only 1 camping season, and this makes sense. That's what I do, and it seems to work out great. It's not too much $ to replace every season.
- Another note, when first putting this filter into service (just the first time of the season, subsequent hook-ups wont do this) there will be a bunch of carbon (black in the water) that comes out of the faucet in your trailer. This is perfectly fine, safe, and of no issue. This is the filter breaking in and getting the extra carbon out of the system. There is no health concern with this happening. I just run the faucet until it clears up, and then we're good to go for the rest of the season.
- Last note, when we unhook from our camping spot, I swing the filter in my hand with my arm extended (using centrifugal force, not centrifical, look it up) to get the residual water out of the filter so it doesn't sit in there and spoil. I do this until I get most of the water drops to stop, leave it out on the counter to dry, and boom, it's perfect the next time.
Cons:
- None to report
Overall this filter does a great job taking care of some seriously nasty campground water that we've encountered all over the Southwest US. I cannot recommend it any higher.
I hope I have helped your purchasing decision of this product. I am not affiliated with the manufacturer, seller or any other product related company nor am I under any obligation to write this review. I do this for my own fun and to help others in the Amazon Community! Feel free to comment and let me know if I have helped you, and please note below if this review was able to help. If you should have any questions, please post them below in the Comments. I try to answer all inquires in a timely fashion to the best of my ability.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 26, 2017
★★★★★ 5
Clean, Great-Tasting Water Made Easy with Camco Tastepure
Style: Standard Filter
I installed the Camco Tastepure RV inline water filter on our rig, and it’s another example of why I’ve come to trust Camco products. The reinforced strain relief hose is a small but incredibly smart feature—it keeps the connection between the filter, hose, and RV kink-free and easy to manage. Setup was simple, and the whole system feels sturdy and well-designed.
A tip I’ve learned through experience: before putting a new filter into service, run water through the internal charcoal filter for 30 - 45 seconds. This flushes out any loose charcoal bits and ensures the first water you drink is crystal clean and tastes amazing. After that, connecting to the RV is straightforward, and you immediately notice how much better the water tastes.
Whether filling up a glass or cooking, it’s made a real difference in our RV experience. Reliable, easy to use, and excellent tasting water every time - I highly recommend this to any RV owner who cares about water quality on the road.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 10, 2026