Carli 2.5" Leveling KING Pintop 2.5 Suspension System 05-07 Ford 6.0L Powerstroke

Carli 2.5" Leveling KING Pintop 2.5 Suspension System 05-07 Ford 6.0L PowerstrokeThe Pintop 2. 5" Suspension System is Carli Suspensions' most popular system for your Ford6. 0L Powerstroke. This system will deliver you a leveled stance that you can tuck up to a 37" tire under, and you'll gain unbelievable gains in ride comfort, both on and offroad, and have a suspension system worth bragging about. Designed and tuned in house for the customer looking for substantial on road and off road performance improvement. You can expect a

The Pintop 2.5" Suspension System is Carli Suspensions' most popular system for your Ford6.0L Powerstroke. This system will deliver you a leveled stance that you can tuck up to a 37" tire under, and you'll gain unbelievable gains in ride comfort, both on and offroad, and have a suspension system worth bragging about. Designed and tuned in-house for the customer looking for substantial on-road and off-road performance improvement. You can expect a softer ride, yet more control and bottom-out resistance than Carli's Backcountry system.

JACK-OF-ALL-TRADES SUSPENSION SYSTEM

The Pintop is a Jack-of-all-trades system from which every SuperDuty owner would benefit. Raising the SuperDuty Platform and then adding the 2.5" diameter shocks (55% more piston surface area than a 2.0" shock) will support the argument that these trucks should come equipped with 2.5" shocks from the factory. The higher-end systems will get you more off-road capability, yes, and even a bit more on-road. The premium paid for these systems; however, doesn't compare to the on and off-road ride quality per dollar spent on the Pintop. For these reasons, it will likely remain a best seller for years to come.

CARLI CUSTOM TUNED KING SHOCKS

The Pintop system boasts Carli-specific, blueprinted, King 2.5" shocks on all four corners. To provide you with the best product, Carli designed a custom piston to determine proper base flow rates to ensure the shock works well in the heavy-duty truck platform; the shocks were then tuned around the custom pistons based on the only thing that truly matters, seat-of-the-pants feel. ALL of Carli's King shocks are finished off with shafts machined and polished from a solid piece of 17-4 Stainless. Unlike King's standard shafts, there is no coating to wear off, weather can't hurt them and if there is a small chip, you can round the edges with emery cloth to ensure the seal housing isn't damaged as they're not brittle like the stock, hardened shafts. The shocks are finished with King oil good to -55° F. Note that all King shocks are built with a plated steel body. If subjected to inclement weather for extended periods, we recommend wrapping your shocks in 3M to provide a replaceable moisture barrier.

The truck will sit 2.5" higher in the front and have more wheel travel thanks to the lighter rate Carli Coil Springs. The included Adjustable Track Bar centers the front axle and Stainless Brake Lines firm up braking and ensure there is enough line for the newfound travel. To round off the front end, you'll get Caster Shims to tighten the steering.

PROGRESSIVE LEAF SPRINGS

The rear can be outfitted with a replacement Full Progressive Spring Pack (reduces capacity to a "light" 3/4-ton) or factory leaf-pack modifying Progressive Add-a-Pack (maintains factory payload capacity and pairs with the factory 2" block). Carli recommends the Full Replacement Leaf Spring packs to give you the absolute best suspension performance and cycling. If capacity is a concern, an aftermarket airbag system should be installed to compliment the Full Progressive Leaf Springs to restore the F-350 capacity. We recommend a system that will allow the airbags to disconnect from the lower mount during suspension cycling to ensure you're able to take advantage of all your rear suspension travel. The Full Progressive Leaf Spring Pack will shift the axle slightly forward in the wheel well to ensure maximum tire clearance for a 37" M/T at full compression.

PROGRESSIVE ADD-A-PACK LEAF SPRINGS:

• OEM Load Capacity Maintained, Improved Ride
• Provides 2.0" of Lift
• Smooth Progressive Design
• Supplied with U-Bolts and Hardware
• Built in the USA by Deaver Leaf Spring
• SuperDuty's equipped with a factory 3-5/8" Block will require the 2" Factory Block [7C3Z-5598-L, 7C3Z-5598-K] to achieve a level stance.

• If ordering this kit with an Add-a-Pack, Super Duties equipped with a 3-5/8" tall block from the factory will require the factory 2" tall Block to achieve a leveled stance with the Add-a-Pack.
• Part Number: 7C3Z-5598-L and 7C3Z-5598-K