XIAO 60GHz mm Wave Human Breathing and Heartbeat Sensor
SKU: 42808989359

XIAO 60GHz mm Wave Human Breathing and Heartbeat Sensor

$20.19 $22.43
Save 10%
No.2 Bestseller on reelrocktour.hu >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 6 - Jul 11

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

XIAO 60GHz mm Wave Human Breathing and Heartbeat SensorAdvanced 60GHz mmWave Human Presence, Breathing & Heartbeat Sensor Kit for Home Assistant Elevate your smart home automation with our cutting edge 60GHz mmWave Sensor Kit , designed for precise human presence detection, breathing monitoring, and heartbeat sensing . This all in one solution features the advanced MR60BHA2 mmWave module, capable of detecting static human presence up to 6 meters away and accurately monitoring the breathing and heartbeat

Advanced 60GHz mmWave Human Presence, Breathing & Heartbeat Sensor Kit for Home Assistant

Elevate your smart home automation with our cutting-edge 60GHz mmWave Sensor Kit , designed for precise human presence detection, breathing monitoring, and heartbeat sensing . This all-in-one solution features the advanced MR60BHA2 mmWave module, capable of detecting static human presence up to 6 meters away and accurately monitoring the breathing and heartbeat of a single stationary person within a 1.5-meter range ( tested in empty deployment environments ).

Seamless integration with your smart home ecosystem is a breeze. The kit includes a Seeed Studio XIAO ESP32C6 pre-flashed with ESPHome firmware , enabling plug-and-play setup with Home Assistant in just 1-2 minutes - no coding required! Easily configure detection zones and access insightful analytics directly from Home Assistant to pinpoint target locations and refine your automations.

Beyond presence and vital signs, this kit incorporates a BH1750 ambient light sensor , allowing for precise light detection (1-65,535 lux, adjustable up to 100,000 lux). This empowers you to create highly responsive automations that adapt to environmental changes, with light readings available as frequently as every second via ESPHome or Arduino IDE. Customize your device's visual feedback with the on-board WS2812 RGB LED .

Expandability is key. An additional Grove connector on the mmWave module allows for easy integration with over 300 compatible Grove sensors and actuators (like PIR sensors or relays) for extended sensing or automation capabilities. To help you get started quickly, we provide an open-source 3D printed enclosure design available for free download, offering a solid foundation for your custom casing. For those with unique application needs, the kit is fully open for customization , with Seeed offering one-stop R&D and manufacturing services for projects requiring 3D point cloud data generation or specific interference zone configurations (contact us at [email protected] ).

Feature 1: Advanced mmWave Sensing for Breathing, Heartbeat and Human Presence Detection

The MR60BHA2 60GHz mmWave Sensor Module excels in detecting breathing and heartbeat with pre-set algorithms, and also includes human static presence functionality.

      • Human Static Presence: Measures effectively up to 6 meters.
      • Breathing & Heartbeat Detection: Accurate for a single person at 1.5 meters with the device stationary.

*The above parameters have been tested in the empty deployment environments.

Feature 2: Powered by ESP32 & ESPHome & No-Code Integration with Home Assistant

The kit features a Seeed Studio XIAO ESP32C6 with pre-flashed ESPHome firmware, enabling seamless plug-and-play integration with Home Assistant . Configure the device in ESPHome, and n o-code setup for Home Assistant in 1-2 minutes. Thanks to the integration, you can customize detection zones and access analytics to pinpoint target locations efficiently from Home Assistant.

Feature 3 : Ambient Light Sensing for R esponsive Automation

The mmWave sensor module includes a BH1750 light sensor, offering precise ambient light detection from 1 to 65,535 lux, with adjustable measurements up to 100,000 lux. Supported by ESPHome and Arduino IDE , it allows you to collect ambient light readings as frequently as every second, enhancing your automation's responsiveness to environmental changes.

Feature 4: Customizable Interaction

This 60GHz mmWave Sensor Module is equipped with a WS2812 RGB LED, allowing for DIY customization of the indicator light.

Feature 5: Extended Sensing or Automation with Grove

We've added one additional Grove Connector to the mmWave Module for easy expansion with your own Grove sensors and actuators (e.g., PIR and Relay). Choose from over 300 compatible Grove Modules!

Feature 6: Open Source 3D Printed Enclosure

To simplify deployment, we offer a 3D printed enclosure available for free download , providing a starting point to customize your casing design.

Feature 7: Open for Customization

Want to tailor-make the kit to fit your unique applications?

For more information about 3D point cloud data generation and interference zone configuration when customizing mmWave modules. Seeed provides one-stop R&D customization and manufacturing services for fast development from concept to production. Contact us at [email protected] to learn more.

Specification
General Parameters
mmWave Firmware Breathing and Heartbeat Detection
Detection Range Human Static Presence Detection: up to 6 Meters

Breathing and Heartbeat Detection: 1.5 Meters

MCU Seeed Studio XIAO ESP32C6
LED WS2812 RGB LED
Button Rest
Light Sensor BH1750 Range: 1 to 65,535 lux with adjustable measurements up to 100,000 lux
Grove Connector 1 GPIO Port

● D0

● D10

Pin Header Spacing 2.54mm
Power Supply 5V/1A
Power consumption 0.5w: Standby Mode

0.8w: Activation Mode

1.4w: Work with Grove Relay status

Hardware Overview

What's in the Box

  • 1 x 60GHz mmWave Sensor Module with 3D Printed Case
  • 1 x Seeed Studio XIAO ESP32C6 with Pre-Flashed ESPHome Firmware

Disclaimer: The exact accessories included in the box may vary based on regional supply, promotional offers, or product updates. Please check the package contents upon arrival to confirm all items.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 42808989359

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.0 ★★★★★
Based on 337 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
J
Verified Purchase
Joe Baumgartner
Waukegan, US
★★★★★ 5
Must need socket for doing oil changes
Size: 32 mm, Color: Red
This is exactly what i was looking for. Now it makes doing my oil changes much quicker to do.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 19, 2026
R
Verified Purchase
Ryan
Chelsea, US
★★★★★ 5
Works great, do the double drain for best results
My 06 Altima (185k miles) had been burning massive amounts of oil (like 4 quarts every 800 miles) due to a leaking PCV valve hose that took forever for me to narrow down (months). So after getting that under control I figured I needed to decontaminate the poor engine. When using this I idled my car to operating temp (about 8 minutes). Poured the bottle in, idled it for another 15 minutes. Drained the oil (black and thick). Put the plug back in, poured about 2.5qts of new oil in. Idled it for 10 minutes. Drained that (black but much thinner). Took the old filter off. Let both areas drain for 10 minutes. Put the plug back in, put the new filter on and filled with the 4.6qts of new oil my car calls for. Ran for a few minutes (like 2 with a few revs) and then let sit for 10 mins before checking the level. When I checked my dipstick it was so clean I thought I had a leak because I couldn't see it on any of the crosshatch. I ended up having to go by touch to get the reading. This stuff is amazing.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 15, 2025
T
Verified Purchase
T. Lee
Natrona Heights, US
★★★★★ 5
Worked for me! Definitely recommend!
Used a whole can in my 2009 Civic 1.8L with 150k miles. I can honestly say, this helped remove a lot of sludge out of the engine. The oil came out with a water-like texture and super dark! Before taking out the oil filter, I added new lower cost oil to the engine and let the engine run for about 5 minutes to get that extra flush! You can definitely see all the extra sludge in the new oil! Drained and refilled with new oil and filter. The engine definitely sounded quieter and smoother than before! If you value your car, I would definitely recommend doing this flush on your higher mileage cars every 50k miles or so! Definitely recommend this LiquiMoly product!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 11, 2025
J
Verified Purchase
JJ
Natrona Heights, US
★★★★★ 5
3rd Update! See review... Good stuff and works as advertised...
Update - 3rd oil change/flush. Engine oil draining from engine is waaaay cleaner than my first flush. Probably won't need to do a 4th time for several changes. I added Ceratec at this change and am amazed how much better the engine performs since my initial flush. Less clatter and very smooth idle. (Jeep 4.0 I6) Update- 2nd change and used the flush again. About 7000 miles from first use. The oil was cleaner and less "gunky" as first time but oil was definitely dirtier than normal. Right away noticed off idle throttle response improved. Then on a drive I take regularly with a mountain pass and long downhill I noticed that even tho the jeep downshifted out of OD it took much less throttle to hold 65 up a long grade. On the downhill normally I would see 50-60 mpg max on the digital readout. This time. It went to 99 which to me indicates more vaccum below the throttle plate. My guess is the rings freed up a bit more than the first flush and highway mileage is up to 23+ where I would get 21 before. Nice! Used in 2001 Jeep Grand Cherokee. 140k miles and a ticking lifter (common in the 4.0 - 6 cylinder...). Definitely cleaned sludge (oil filter very heavy!) and oil was dark when draining. Idles smoother, oil stays cleaner longer, slight oil pressure increase and runs cooler. The lifter still ticks but probably a cam lobe issue. Will use it after 7500 miles or 1 year. Will report back after next change.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 22, 2017
J
Verified Purchase
J N Brown
New York, US
★★★★★ 5
Tips and tricks
I watched several videos by professionals who used this. Follow instructions. Make sure the engine is warm before you put it in. Make sure you have everything you need. The biggest tip I got that was repeatedly emphasized by the pros was to buy a “cheap” oil in addition to the new oil. After you run the flush drain the oil and flush. Put the cheap oil in and “rinse” the inside of the engine with the cheap oil. Then drain again. Replace the oil and filter with your good stuff. I followed these instructions or suggestions and…. I sat in the truck while the flush was running. It’s a 13 year old truck with 150,000 miles. It was running strong but burning oil and kind of loud. Sounded like it was growling. There were some ticking type noises that made me nervous. As I sat in the truck and let the flush cycle through the engine at idle I could literally hear the flush working. Very slowly it was like someone gave the engine a Xanax and you could hear it getting quieter and calming down. I drained, rinsed with cheap oil only letting the cheap oil run through at idle for another 15 minutes then drained again. The oil flush was clearly important. It didn’t come out as black as the first drain but it looked like old nasty oil. The truck is no longer burning oil. My gas mileage has increased significantly and it is running so quiet and smooth it’s unbelievable. I used a little less of the liquid Molly flush than it called for regarding the flush to oil ratio. I didn’t want to do something too intense to the inside of the engine. But the results were remarkable. Just as advertised after following the instructions. I also added the liquid Molly oil additive to the final oil change to ‘lube’ the inside of the engine. I plan to do another flush in about 10,000 miles. All that to say, yes, you won’t be disappointed as long as you follow instructions and a few tips and tricks. My truck is almost running like a brand new truck and again it’s an old and tired truck. I will use this as part of a high mileage maintenance and perform the flush every 50,000 miles or so. I feel confident it will extend the life of my engine based on the results
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 9, 2024

recommand products

Allen Bradley via TCS 1494CCM10 Ser. A NSFP (BR/WH) 1494C CM10
540.00
Allen Bradley via TCS 810A02A Ser. B NSNP
780.00
Allen Bradley via TCS 700HA32Z24 Ser. D NSFP (WH) 700 HA32Z24
18.85
Allen Bradley via TCS 365TCV2111A NSFP (BR/YL) 365 TCV2111A
653.01
Allen Bradley via TCS 800FNUG Ser. A NSFP 800F NUG
32.08