Awave DSP-16MAX 16-channel amplifier with 16-channel DSP

Awave DSP-16MAX 16-channel amplifier with 16-channel DSPA serious DSP amp for very complex systems. It's a new generation 16 channel DSP. 2 channels of RCA inputs, 16 high level inputs, coax SPDIF input, optical TOSLINK input, Bluetooth AptX HD optional input, optional digital remote control for volume, sub level, preset selection, input selection, mute trigger. 12x80W RMS @ 4 Ohm amplified channels (at <10% THD+N), 16 channel RCA output, this DSP amp has more than you should ever need, even for the most

A serious DSP amp for very complex systems. It's a new generation 16-channel DSP. 2 channels of RCA inputs, 16 high-level inputs, coax SPDIF input, optical TOSLINK input, Bluetooth AptX HD optional input, optional digital remote control for volume, sub level, preset selection, input selection, mute trigger. 12x80W RMS @ 4 Ohm amplified channels (at <10% THD+N), 16-channel RCA output, this DSP amp has more than you should ever need, even for the most complicated multichannel active systems with high-end OEM integration. Perfect for 4-way active front + 3-way rear amplification with an external subwoofer amplifier or 4 Ohm subwoofer on bridged channels 15 and 16 (yes, these are bridgeable even if undocumented). The powerful multichannel input EQ, time alignment and allpass filtering allows for proper OEM integration with the 16 (!!!) high-level inputs. Infinitely expandable to use high-end external amps via its 8V RCA outs on every channel - you can also use this DSP amp as a standalone DSP if need be. It's truly a massive, universal all-in-one unit!

The DSP supports the following on every output channel:

• High pass, low pass and band pass crossovers (Linkwitz Riley, Bessel and Butterworth) up to 48 dB/oct
• 31 band fully parametric EQ with +/-15 dB correction, Q-value 0.3 to 15
• 1st and 2nd order Allpass filters with Q control and inversion (each of the 31 EQ bands can be switched to Allpass)
• Time delay up to 15 ms for time alignment, selectable in ms, cm or inches, optional linking of channel pairs
  
• Phase phase switching between 0 and 180 degrees
  
• Level correction from 0 to -40 dB, optional linking of channel pairs
  
• Fully functional input mixer, live mixing of inputs (2 inputs active in parallel as assignable main+aux), allows the set up of a differential rear fill
  
• Internal pink noise generator to test each individual output channel

The input of the DSP supports the following corrections on every input channel, including the COAX, TOSLINK and Bluetooth, separately:

• High pass, low pass and band pass crossovers (Linkwitz Riley, Bessel and Butterworth) up to 48 dB/oct
• 10 band fully parametric EQ with +/-15 dB correction, Q-value 0.3 to 15
• 1st and 2nd order Allpass filters with Q control and inversion (each of the 10 EQ bands can be switched to Allpass)
• Time delay up to 15 ms for time alignment, selectable in ms, cm or inches
  
• Phase phase switching between 0 and 180 degrees
  
• Level correction from 0 to -40 dB

Configuration software for Microsoft Windows: DOWNLOAD HERE

Manufacturer provided specs:

• Operating voltage: 9-16 VDC
• Standby power: <0.1W
  
• Frequency response: 20Hz-20kHz
• Output power at 10% THD-N: 12x 80W RMS @ 4 Ohm
• S/N Ratio full power A-: 100dB
• Dynamic range: 100dB
• CPU: Dual Analog Devices ADAU1462
• AD & DA: AKM AK5538 and AK4458VN respectively
• Resolution: 192kHz sampling rate, 32bit core operating rate
• Max input voltage: high level 32Vpp , RCA 6Vpp
• Max output voltage: high level 28Vpp, RCA 8Vpp
• Input impedance: high level 10 Ohm, RCA 47 kOhm
• System sample rate: 96kHz/24Bit
• Start-up time: <5s
  
• Inputs: 2xRCA analogue, 1x RCA SPDIF coax, 1x TOSLINK SPDIF, 16x high-level, optional Bluetooth 5.0 AptX HD module
• Outputs: 16x Speaker level amplified, 16x RCA pre-outs
• Control connections: 1x USB 1.1/2.0, optional wired remote (DRC)
• 8 full setup presets
• Output signal gain: -40dB to +12dB
• Auto on via high level signal detect or remote input
• Operating temperature: -20~60C
• Storage temperature: -20~85C
• Net weight: 5.1 kg
• Size: 307 x 276 x 50 mm

What's included:

• 1x DSP Amplifier unit
  
• 5m USB A-B cable
  
• 2x High-level input harnesses
  
• 2x Speaker output harnesses
  
• Mounting brackets and fasteners
• 1x Instructions