KPM Motorsport StreetFighter 2,200 HP Fuel System | VE - VF

KPM Motorsport StreetFighter 2,200 HP Fuel System | VE - VFKPM Fuel Systems are at the forefront of fuel module innovation with their line of next level high performance fuel pumps to suit big horsepower builds. KPM Fuel Systems are proud to release the highest level of direct fit fuel systems for the VE VF Commodore and HSV range of vehicles including Ute, and Statesman Grange. With the modern Commodores being tuned to amazing power levels comes the need for a high performance fuel system. KPM has met this

KPM Fuel Systems
are at the forefront of fuel module innovation with their line of next level high performance fuel pumps to suit big horsepower builds.
KPM Fuel Systems
are proud to release the highest level of direct fit fuel systems for the VE-VF Commodore and HSV range of vehicles including Ute, and Statesman/Grange.
With the modern Commodores being tuned to amazing power levels comes the need for a high-performance fuel system.
KPM has met this need with a direct replacement high performance fuel system that will perfectly support power levels from standard all the way to 2200 hp.
No other Commodore fuel system supports as much power with the efficiency, functionality, and fuel delivery of the KPM 2200 hp fuel system.

How it works
The
KPM 2200 hp Fuel Module
System is engineered, utilising 3 x high performance fuel pumps, all housed in two separate OEM style high flow fuel modules and distribution manifolds.
The primary module is the KPM1500 (2 pumps) and the second module being the KPM700 (1 pump). Both
KPM
fuel modules are mounted and immersed in the vehicle's fuel tank as per OEM design and for ease of fitment.
The development and testing of the
KPM
modules was focused on supplying guaranteed delivery of cool, dense fuel to support 2200 hp at the engine on pump fuel.
Our objective was a reliable solid fuel delivery, to a 2200 hp engine in the extremes of racing as well as everyday road driving.
To achieve our objectives, our
KPM Fuel Systems
engineer designed and incorporated a
six
Venturi
Pump and Refill Valve System
designed to scavenge fuel from both sides of the Commodore fuel tank and permanently keep both the fuel canisters full. We also incorporated a PWM system to control the fuel pump operation and deliver fuel precisely as needed.
This means you have the best of both worlds and can run the
KPM
fuel modules at any fuel levels safely under normal road conditions, without the risk of surge or fuel starvation.
When you go racing (circuit or drags) and under full load applications, fuel levels are simply required to be run at recommended levels* to avoid risk of surge or fuel starvation.
The fuel pumps are both 100% petrol, ethanol and methanol compatible and able to deliver massive amounts of cool, dense fuel at standard vehicle voltages.
This equates to optimum tuning and power levels up to 2200 hp
(flywheel rated on 98 octane fuel)
.
*Minimum 40 litres of fuel for full load applications

Features Of The KPM 2,200hp Fuel System
KPM Fuel Systems
have designed a PWM Fuel Module Controller that can electronically run the primary KPM1500 Fuel Module and the secondary KPM700 Fuel Module in any combination.
Its main purpose is to control the supply of fuel flow in accordance with the engine power and fuel demand. It does this by electronically controlling the amount of current supplied to the fuel pumps.
The
KPM PWM Fuel Module Controller
is supplied pre-programmed to run only one or both modules together depending on power/fuel demand.
Both primary and secondary modules will always only run at a desired current that is determined by the power/fuel demand. This ensures cooler fuel and accurate supply.
Less fuel pump current =
less heat
=
cooler fuel
=
more power
Supplying fuel to support 2200 hp and beyond requires three high-flow fuel pumps, housed in two in-tank fuel modules. The drawback to this scenario is that two or more fuel pumps can generate quite a lot of fuel pump current meaning increased heat.
This transfer of heat needs to go somewhere and therefore, heats the fuel in the tank. This is generally not a concern however, if the vehicle is idling or being driven for long periods with a low level of fuel in the tank, the fuel may start to reach a point of losing its full energy potential or start vaporising in the pumps or fuel lines. This can cause long cranking times and hard re-starts. In the worst cases, the fuel pumps will start to cavitate, lose pressure and not supply fuel as intended.
The KPM PWM controller is pre-programmed to monitor your vehicle fuel pressure across all engine loads which, in turn, allows the controller to calculate the required level of electrical current to your fuel pumps. This, in turn, delivers the correct amount of fuel to your engine as required across all conditions. -
Cooler fuel means increased performance
Vehicles
with
a Factory Fuel System Control Module (
FSCM)
VE/VF Commodore & Gen F HSV incl Ute, WM/WN statesman/Grange (2010-2017)
The KPM PWM Fuel Module Controller comes complete with wiring to be connected to the vehicle's factory FSCM to read the OE signals. The KPM PWM Fuel Module Controller uses the OE signals from the FSCM to calculate the correct current required to run the pumps accordingly. The KPM PWM can also be programmed utilising the OE fuel system programming tables.
Vehicles
without
a Factory Fuel System Control Module (FSCM)
VE Commodore incl Ute, WM Statesman/Grange (2006-2009)
The
KPM
PWM Fuel Module Controller comes as a stand-alone pre-programmed controller for vehicles not fitted with a factory FSCM. The
KPM
PWM Fuel Module Controller is supplied with a fuel pressure sensor kit and wiring that directly fits your vehicle's fuel system. The fuel pressure is then used to calculate the correct current required to run the pumps accordingly.
To support up to 2200 horsepower at the engine, the fuel supply requirement is massive as your standard fuel lines will not handle it!
KPM
have engineered a direct replacement, direct fit stainless steel fuel line upgrade kit. No messing around with time consuming cumbersome fittings, cutting etc. Simply remove your standard metal fuel lines and fit our pre-shaped direct fit stainless steel ½' lines. We supply every section required from your fuel module all the way to the engine. All the sections have been manufactured with EFI fittings and connectors to make for a sleek ‘click' together style of OE fitment.
Included in the
KPM Fuel Line Upgrade Kit
, is our
KPM 2200 hp Fuel Filter
. The fuel filter fits directly to the upgraded fuel lines, again making for a direct easy fit. The KPM 2200 Fuel Filter housing is made of anodised aluminium and houses a 40-micron stainless steel, cleanable lifetime fuel filter element. This makes the fuel filter fully serviceable without the need to ever replace it.
Stainless steel fuel lines, anodised aluminium filter housing and stainless steel fuel filter elements all guarantee a fuel system 100% compatible to all fuels including methanols, ethanols, race fuels and petrol.
The
KPM Fuel line and Fuel Filter Upgrade Kit
is essential to for maximum fuel supply without restriction of clean fresh fuel to run your engine at maximum performance.
The
KPM 2200 hp Fuel and PWM System
is a complete solution fuel system with the Fuel modules fitted in the OE location, the PWM easily mounted as per the instructions provided and the Fuel Line and Fuel Filter Upgrade a direct replacement to the factory lines.
The only extra requirement is to route the high amperage wiring and connector kit, that comes supplied with easy fit OEM style plug and play connectors.*
The KPM 2200 hp fuel system is now ready for your tuning professional to calibrate your fuel system and tune your vehicle as normal with any well-known tuning software.
*Earlier model 2006-2009 Commodores also require the extra easy fit Fuel Pressure Sensor Kit to be fitted.
KPM 2200 hp Fuel and PWM System
details:

Fitting and calibration instruction included.
Vehicle Body Type Part Number
VE Sedan (2006 - 2009) KPMCOM2200PWM-PK
VE Ute (2006 - 2009) KPMCOM2200PWM-PKU
VE/WM Statesman/Grange (2006 - 2009) KPMCOM2200PWM-PKL
Vehicle Body Type Part Number
VE/VF & Gen F HSV Sedan (2010 - 2017) KPMCOM2200PWM-P
VE/VF & Gen F HSV Ute (2010 - 2017) KPMCOM2200PWM-PU
VE/VF/WM Statesman/Grange (2006 - 2009) KPMCOM2200PWM-PL

Need Some Assistance With Your New Fuel System?
Sure! Give us a call on
(03)8595 4343
OR Simply click
Get In Touch
& schedule a time that best suits you. We will have one of our sales consultants contact you at your convenience.
Alternatively, We are available for Live Chat right now!

Shop Now!