Direct Feed Humidifier Industrial Misting Fogging Hanging System

Direct Feed Humidifier Industrial Misting Fogging Hanging SystemHumidifier industrial commercial direct water feed industrial humidifier fogging system is our smallest, simplest fog fan. This unit is easy to install, dependable, and low in cost, so it is ideal for humidification and evaporative cooling in smaller settings. Automatic Humidistat humidity control helps set and keept air humidity steady 24 7. This centrifugal atomizer has a rear feed blade system that quietly produces billions of tiny, fog like

Humidifier industrial commercial direct water feed industrial humidifier fogging system is our smallest, simplest fog fan. This unit is easy to install, dependable, and low in cost, so it is ideal for humidification and evaporative cooling in smaller settings.

Automatic Humidistat humidity control helps set and keept air humidity steady 24/7. 

This centrifugal atomizer has a rear-feed blade system that quietly produces billions of tiny, fog-like particles that evaporate quickly. Units hang by either a single U-bolt or a universal mounting bolt. The housing pivots easily by hand.

Shipped complete, ready for use. Shipped in box, by Tracking Co. right to the door, safe, insured no damaged

Each unit comes with a 14 feet power cord with plug, 20 feet of water line, 12 feet of drain line, and a visual flow meter control panel. Components are UV stabilized for greenhouse or outdoor use. All control packages for the Direct Feed include a water solenoid to control both power and water supplies.

Quiet Operation, Easy Pivot Fogging Head, Nozzle-Free Atomization, Up to 5 GPH, Stainless Steel Components, Garden Hose Connect.

Include: Direct Feed unit comes with a flow-meter panel. This panel controls the water flow rate and fogging output. It features stainless steel construction and a clear polycarbonate flow rate scale for monitoring. Flow-meters require a water supply of 10 to 100 PSI. Arrives safely packaged, impact protected and fully assembled. Ready for use.

Fasco Motor: Industrial Grade total enclosed For extended life in use around water, Stainless Steel Shaft

Specifications:

Dimensions:

17 x 12 x 16in.

Approximate Weight:

Fogging Capacity: 10 lbs

Up to 5 GPH. gal per/hr.

Approximate Shipping Weight: 28 lbs

Power Motor : 115v. 0.5a. 1/20hp. 60Hz.

Noise @ 10 ft distance:

10 feet - 63 dB(A)

Average Particle Size:

low volume

40 microns

Shipping Box size: 19in. 19in. 19in.

CFM: 980

Hardware: 304 (18/8) Series stainless steel

Environment:

Endures temperatures from

33F to 160 F

Indoors / outdoors

Humidity to 85% RH

UV stabilized & impact resistant

Extra Automatic controls optional - select when ordering bellow

Humidistat Humidity Automatic Control

This pre-wired humidistat is an ideal means of control for applications requiring 80% or less relative humidity. It incorporates a fast-acting sensing element with a simple control dial. Includes piggy-back plug.

Cycle Timer Automatic Control

Want to maintain high humidity above 80%? Then this pre-wired time-cycle control is what you may need. Select time cycles ranging from 30 seconds to 4 hours. Water-tight Nema 4X, Includes 115V piggy-back plug

Thermostat Automatic Control

If your primary interest is indoor evaporative cooling, then this pre-wired control is what you need to automate your unit. Water-tight Nema 4X, Control range 40-110º F, Differential 2º F, Includes 115V piggy-back plug

24 Hour Timer Automatic Control

For automating on/off cycles. This reliable mechanical timer turns power on and off at selected intervals. Ideal for dawn-to-dusk type applications. Rain-tight enclosure, 115V - 15A receptacle. Two sets of on/off trippers provided, Minimum 30 minute intervals

Water Solenoid Automatic Control

Control water flow, electrically. Use with preexisting control systems. Connect directly to the same power supply to automate water flow (on/off) in conjunction with the fan. Safeguard against power outage. If operating fogging units manually (no control system), a water solenoid installed in the units water supply line will shut off water flow in the event of a power outage. 10? power cord with plug, 115V, NEMA 4 Water-tight components, ¼? OD tubing connections

Humidity Meter & Dew Point

Ideal for applications up to 100% Relative Humidity. This precision hand-held thermo/hygrometer is ideal for measuring and monitoring ambient and dew point temperatures and relative humidity in a wide range of professional and industrial applications. Dual readout LCD displays in F or C. Temperature range/accuracy: -4 to 122F (-20 to 50C)/1.8F (1C), Humidity range/accuracy: 0 to 100%RH /3% , Response time: 60 seconds, Power source: Two "AAA" batteries (included).

Humidity & Temperature Meter

This precision hand-held thermo/hygrometer is ideal for measuring and monitoring ambient temperatures and relative humidity in a wide range of professional and industrial applications. Dual readout LCD displays in F or C, Temperature range/accuracy: 32 to 122F (0 to 50C)/1.8F (1C) ,Humidity range/accuracy: 20 to 95%RH /3%, Response time: 60 seconds, Power source: CR2032 Lithium-ion battery (included)