Talaria Mx3/Mx4 Carbon Fiber Wrap Kit

Talaria Mx3/Mx4 Carbon Fiber Wrap KitThe Talaria Mx3 Mx4 Carbon Fiber Kit features the highest quality carbon fiber cut outs for each plastic piece on the Talaria Mx3 Mx4. Sold as a kit or individually, these wraps are the cleanest carbon fiber released for the bike, with the weaving changing visually depending on the angle. Fully mod the stock battery lid, rear seat fender, rear wheel fender, motor cover, and ignition to look aggressive, yet sleek. THIS PRODUCT IS DIY AVAILABLE IN

The Talaria Mx3/Mx4 Carbon Fiber Kit features the highest quality carbon fiber cut-outs for each plastic piece on the Talaria Mx3/Mx4. Sold as a kit or individually, these wraps are the cleanest carbon fiber released for the bike, with the weaving changing visually depending on the angle. Fully mod the stock battery lid, rear seat fender, rear wheel fender, motor cover, and ignition to look aggressive, yet sleek.

‼️THIS PRODUCT IS DIY‼️

AVAILABLE IN MULTIPLE COLORS/STYLES!

HEAT VINYL UP TO ACTIVATE ADHESIVE

Parts don't come labeled to keep the surface of the wrap intact, match up pieces of wrap depending on size with corresponding part.

‼️ BIGGEST CUTOUT IS FOR THE BATTERY LID !!

NOTE: Holes for all bolting places must be poked out using a knife or a sharp object so that the plastics can be threaded back into the bike. Edges of wrap are also recommended to be cut and traced with razor after installed on plastic. Wraps don't come labeled, match the sizing up with the part. cutouts of various sizes must be cut out for the following parts and places:

Motor cover: Talaria emblem

Ignition: key slot