LightShark LS NODE1 RDM/DMX Streaming Device

LightShark LS NODE1 RDM/DMX Streaming DeviceThe LS Node series is the new RDM DMX streaming range from WORK PRO that supports industry standards ArtNet & sACN. They feature from 1 up to 4 DMX universes, with 3 different models: LS Node1, LS Node2 & LS Node4, each of which adds its respective number of freely configurable DMX universes. These small LS Node products are available in the same quarter rack physical format as the original LS Core, are powered via a compact USB C connector or by PoE,

The LS-Node series is the new RDM/DMX streaming range from WORK PRO that supports industry standards ArtNet & sACN. They feature from 1 up to 4 DMX universes, with 3 different models: LS-Node1, LS-Node2 & LS-Node4, each of which adds its respective number of freely configurable DMX universes.

These small LS-Node products are available in the same quarter-rack physical format as the original LS-Core, are powered via a compact USB-C connector or by PoE, which is helpful when used in installations where they may be rack-mounted with an optional LS-AR 19 rack chassis.

All LS-Node products come with an integrated Ethernet switch with 2 ports and are multiprotocol, supporting the industry standards ArtNet and sACN.

LS-Node is fully compatible with LightShark consoles and can also be configured via a webserver, through which users can set up parameters like DMX frame rate (from 15 to 40 frames/s), firmware upgrades, independent RDM/DMX ports routing (any universe can be routed to any of the RDM/DMX ports independently) and modes of use.

With ArtNet/RDM compatibility, LS-Node allows configuration, status monitoring and management of remote devices from lighting consoles.

All the models feature several modes of use:

• Single Mode: DMX to ArtNet/sACN transceiver (LS-Node1 & LS-Node2 models) configurable via web.
• Merger mode: where the LS-Nodes can receive different universes (via ArtNet/sACN or DMX) and merge them in the same output, being able to select HTP/LTP merge modes.
• Backup mode: When LS-Node works in Backup mode with two consoles connected, the device can detect a loss of connection from the primary console and automatically switch to the backup console with a max latency of 3 seconds.

Specifications

• 1 RDM/DMX input and output.
• Ethernet-RDM/DMX bidirectional transceiver.
• Every port independently configurated.
• Merger HTP/LTP mode.
• Backup mode.
• Supports sACN, ArtNet/RDM/DMX.
• Integrated Ethernet switch.
• DMX frame rate configurable.
• PoE (Power over Ethernet) powered.
• 1/4 rack 19'' enclosure.